12mm RGB LED Module WS2811 Pixel Node Module Light String Addressable DC5V Non-waterproof

Quick Details Type:LED Modules Emitting Color:RGB Power:other Color Temperature:rgb Place of Origin:Jiangsu, China (Mainland) Brand Name:HD Packaging & Delivery 1.Product discription Place of Origin: Xuzhou China Brand Name: HD Item Type:LED Modules Certification:CE,RoHS Model...

Product Details

Quick Details
Type:LED Modules
Emitting Color:RGB
Power:other
Color Temperature:rgb
Place of Origin:Jiangsu, China (Mainland)
Brand Name:HD
Packaging & Delivery

Packaging Details:1.Good quality carton 2.According to the customer's requirements of packing
Delivery Detail:10-20days

1.Product discription
Place of Origin: Xuzhou China
Brand Name: HD
Item Type:LED Modules
Certification:CE,RoHS
Model Number:MB-PM2801-66
color:full 24 bit color
GREEN WIRE: CLOCK
BLUE: Ground
Working voltage: DC5V
Working consumption: 0.3W
IP grade: IP 66
Dimension: 12mm
LED type: F8 RGB LED
LED qty: 1PCS
Lifespan: More than 50000h, 2 years warranty
Input side: is the side with IC
12mm diameter (0.45") 75mm deep (1.5")
100mm cable between each lights
50 pieces per strand
WS2801 chip for full 24 bit color
2-pin SPI-like protocol
WS2801 Datasheet for the chip inside each pixel
Brightness: Red = 3.3 Lumens/300 mcd, Green = 10 Lumens/1000 mcd, Blue = 2.7 Lumens/300 mcd (mcd calculation based on full 120 degree beam)
RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick. They're typically used to make outdoor signs.
Each dot is digitally controlled, with an internal 8-bit PWM LED driver (24-bit color for 16 million different shades). The pixels must be clocked by a microcontroller, we have an example code linked below that works on an Arduino, it should be simple to adapt it to any other microcontroller.
The pixels use 8mm diffused RGB LEDs, with a 120 degree beam width. The total max brightness of all LEDs is about 1600mcd but with the light more evenly distributed & mixed than a clear LED.

2.Payment Of Terms:
T/T,L/C/,D/A,D/P,West Union,Money Gram
3.About our company:
1)Company Profiles
Xuzhou Shoulder Electronics Co., Ltd. is specialized in the frequency primary device and LED lighting and Solar panel development and the production enterprise, mainly produces the SAW filter and Resonator series products and LED lighting and Solar paenls, applies in the communication, the radio frequency remote control, multimedia, the computer and so on many kinds of domains.After 10 years  development, the customer popularized  everywhere, and has established the good partner relations with many famous companies.
2)Quality Control
Our QC policy is to manufacture satisfactory products with reasonable cost. Therefore, stable quality is our goal in every stage from product planning, design development and manufacturing. Strict following ISO 9001: 2000 system, we conduct regular training for the staff. At the same time, we pay more attention to environment protection and implement this policy in all efforts.
3)Research and Development:
We established the scientific research, the development organization which was composed by the multi-experienced engineers and technicians, including 1/3 engineer to have 20 year above research and development experiences.

 

Inquiry